Curing Units

Formlabs Form Cure

  • Automated cleaning of parts straight out of the printer.
  • Consistently Clean: Form Wash’s rotating impeller agitates isopropyl alcohol (IPA) around every nook and cranny of your parts, getting them perfectly clean–every time.
  • Built to Fit the Build Platform: Parts travel straight from the Form 2 to Form Wash; they can stay right on the build platform or be placed in the basket.
  • Automated Wash Cycle: Manual washing requires careful attention, as parts left too long in IPA can become warped/deformed. Form Wash automatically raises parts out of IPA when wash time is up. Parts air dry and are ready when you are.
  • IPA Calibration: Form Wash can hold up to 8.6 L liters of IPA, enough to wash approximately 70 prints. The hydrometer lets you know when it’s time to change out IPA. A siphon makes it easy to transfer IPA in and out of the wash bucket.

Form Cure is finely tuned to bring parts to their maximum mechanical properties.

  • Maximum mechanical properties for high-performance materials.
  • Advanced Heating: Heat control is the key to precise, successful post-curing, carefully scaling temperatures up to 80 °C in the cure chamber.
  • Balanced Light: 13 LEDs use 405 nm Light to trigger the post-curing reaction, working with the heater to post-cure parts.
  • Uniform Exposure: A rotating turntable, heat flow, and dispersed lights provide uniform exposure during post-curing.
  • An Intuitive Interface: It’s easy to set Form Cure’s temperature and post-cure time. For Standard Resins, simply use the default. For all other materials, use recommended settings for optimum performance.

*For Standard Resins, simply use Form Cure’s default time and temperature. For all other materials, use unique recommended settings for optimum performance.

Upcoming Deals

Flyers

Formlabs Form 2 Bundle