Custom Automated Prosthetics
Home » Product » Roland Mills

Roland Mills

CAPZilla Now Available Button


New DWX-51D 5-axis, dry mill
DWX-4W 4-axis, wet mill

Versatile, fully open milling machines for dental labs Designed to streamline the production process, Roland milling machines are some of the top Zirconia milling machines on the market. Built on open technology, allowing for easy integration with CAD software and scanners, Roland dental milling machines allow you to grow your business by adding additional production capability at a fraction of the cost.
Have CAP contact you about Roland mills today

Refurbished DWX-50

Distributor Refurbished Roland DWX-50

You can now purchase a DWX-50 for a fraction of the original price of a new mill.  CAP tech team has developed a refurbished plan that includes new spindle, full tune-up, cleaning and much more. These DWX-50’s come with a 6-month warranty, as well as CAPZilla, CAM and mill managers software solution. CAPZilla will make you and your mill(s) run more efficiently, reducing labor, remakes and control of inventory. For more information on CAPZilla click here


Roland DWX-50 Milling Machine has been the one of the most successful mills ever introduced to the dental lab community. The compact design, clean, quiet operation, and precision machining of copings, crowns and bridges. The DWX-50 streamlines the production process with 5-axis simultaneous machining capability and a 5-station automatic tool changer. At CAP we have integrated a CAM strategy that uses a 0.3 mm tool and developed strategies to mill the most complex geometries needed. This provides highly detailed anatomy on both single units and the most complex cases. An integrated air blower system aids with difficult to machine materials, such as PMMA or zirconia, along with a built-in dust collection tray that can be easily connected to any lab vacuum system, keeping the cutting area clean and free of debris. While there are numerous dental milling machines in the marketplace, only the DWX Series delivers the advanced features the market demands at an attractive price point – backed by Roland’s proven reliability and legendary support.


Have CAP contact you about a fully refurbished Roland DWX-50

  • 5-Axis simultaneous machining, milling on X, Y, Z axes
  • Ideal for precisely milling wax, zirconia and PMMA
  • Maximum machine speed of 3,600 mm/min
  • Maximum spindle speed of 30,000 rpm
  • Five station automatic tool changer
  • Virtual machine panel (VPanel)
  • Clean cutting area leads to precision
  • Multicast capable
  • Built-in LED light
  • Open design for easy integration

Roland Close Up Angled

Technical Specifications:
  • Cuttable Material: Zirconia (pre-sintered), wax, PMMA
  • Loadable Workpiece Shape: Disc (with steps): External diameter (step section): 3.85 in to 3.94 in (98 mm to 100 mm) External diameter (body section): 3.74 in (95 mm) Height: .47 to 1.02 (12 to 26 mm) Disc (without steps): External diameter: 3.85 in to 3.94 in (98 to 100 mm) Height: .39 in to .55 in (10 to 14 mm), .63 in to .79 in (16 to 20 mm) Block: Width x Depth: 1.50 in x 3 in (38 mm x 76 mm) Height: .63 in or .87 in (16 mm or 22 mm)
  • Operating Speed: X and Y axes: 0.24 to 141.73 in./min. (6 to 3600 mm/min.) Z axis: 6 to 0.24 to 70.87 in./min. (1800 mm/min.)
  • Spindle Motor/ Spindle Speed: Brushless DC motor, maximum 100W | 6,000 to 30,000 rpm
  • Number of Tools Housed: 5
  • Required Tool Dimensions: Shank diameter: .16in (4 mm), Length: 1.57in to 2.17in (40 to 55 mm)
  • Required Compressed Air: 0.2 to 1.0 MPa (29 psi to 145 psi)
  • Vacuum Requirements: 8 kPa Static Pressure or more
  • Interface: USB (compliant with Universal Serial Bus Specification Revision 1.1)
  • Power Requirements: Voltage and frequency: AC100 to 120 V/220 to 240 V ±10%, 50/60 Hz (over voltage category II, IEC 60664-1) Required power capacity: 2.8 A (100 to 120 V)/1.2 A (220 to 240 V) Voltage and frequency: AC100 to 120 V/220 to 240 V ±10%, 50/60 Hz
  • Power Consumption: Approx. 275W
  • Operating Noise: During operation: 70 dB (A) or less (when not cutting) During standby: 45 dB (A) or less
  • External Dimensions: Width x Depth x Height: 25.9 x 25.9 x 22 in. (656 x 656 x 557 mm)
  • Weight: 110 lb (50 kg)

Click below to see the warranty information for DWX-50 Roland2


Roland DWX-4W

The DWX-4W wet mill cuts precision crowns, bridges, inlays and onlays, and veneers. Simultaneous 4-axis milling and other special features provide unattended milling. Up to three standard pin-type blocks can be loaded for increased efficiency. In addition to milling on X, Y and Z axes, the DWX-4W rotates pin-type blocks 360 degrees on a fourth axis (A axis) to support undercuts. The ball screw-driven 4-axis control allows for smooth, high-precision machining. The DWX-4W’s high-performance 60,000 RPM Jaeger spindle supports precision milling of glass ceramic and composite resin. With its multi-pin clamp, the DWX-4W can mill up to three different pin-type materials continuously in one operation. As a result, prosthetics for up to three different patients can be produced in a single production run, saving time, labor and costs.
close up pretty mill2

Have CAP Contact You about the Roland DWX-4W Today

milling blocks
wet milling


  • Simultaneous 4-axis wet mill
  • 4-state Automatic Tool Changer (ATC)
  • 60,000 RPM Jaeger DentaDrive Spindle
  • CAM software bundled
  • Virtual Machine Panel (VPanel)
  • Fully integrated water and coolant filtration system
  • Coolant leakage and flow monitoring sensors
  • Tool life monitoring
  • Mail notification system
4W thumb


Roland DWX-51D

The next generation of dry milling.

The DWX-51D is the latest update to the DWX-50, which became the leading dry-milling machine in the U.S market in 2014. It encompasses technological advancements and a 5-axis system that maximizes performance and ease of use. The DWX-51D is compatible with 98.5mm discs and is capable of milling zirconia, PMMA, PEEK, composite resin, wax, and gypsum. This versatile mill is also capable of milling up to 9 pin-type blocks simultaneously.

  • Trade-in & Upgrade | With CAP’s trade-in program, exchange a DWX-50 for the DWX-51D
  • CAPZilla Software Included | Reduce digital workflow time by 40%
  • Incentives & Financing Available | Section 179D tax incentives and financing from CAP’s partners facilitate a quick and easy purchasing experience, getting labs up and running as soon as possible


epic blue 51d

  Features and Benefits:
  • Simultaneous 5-axis dental mill
  • 10-station automatic tool changer
  • Included 9 pin-type material adaptor
  • Inproved frame rigidity for superior stability
  • Newly-designed airflow systems for maximum extraction and east cleaning
  • Airflow sensor optimizes cutting waste removal by the dust collector
  • On-screen animated cleaning instructions
50 vs 51D Analysis Button
white front 51d-2
tool holder 51d-M
model inside 51d-M
  • Contact Us

    Phone: 877-977-7889

    Support hours are from 8am - 8pm EST


    85 Maple Street, Stoneham, MA 02180

    1155 NE Cleveland St. Clearwater, FL 33755