Custom Automated Prosthetics
Home » Product » Novux Scanners

Novux Scanners

Introduction

Novux D750

Workhorse of productivity

Novux D2000

All-in-one scanning for max throughput

Have CAP contact you today about Novux Scanners

 

Novux D750

Novux D750 Scanner

The Novux® D750 is the workhorse of laboratory productivity.D750 It features a new technology platform combined with a larger interior space and blue LED for reduced scan noise. The D750 is the right choice for medium-sized labs where high throughput is the key criteria for larger labs expanding their scan-stations.
Advantages
  • Impression scanning enables prosthetic design to start immediately
  • Extended interior and multi-die scanning
  • The scanner comes with an open interface, scans (stl-files) can also be downloaded onto other CAD software

Technical Info

  • Accuracy: 10 µm (ISO) / 12 µm (Implant bar)
  • Single die scan time: 25 seconds
  • 3 unit bridge scan time: 125 seconds
  • 2 x 1.3 MP cameras with Blue LED

Have CAP contact you today about Novux Scanners

 

 

Novux D2000

Novux D2000 Scanner

The Novux® D2000 has all-in-one scanning for maximum throughput.

The D2000 has room for two models in its interior, enabling technicians to scan two models at once and perform a complete case like a three-unit bridge in just one scan. With an optimized processing speed this creates faster performance and better scanning workflows for several indications.

The calibrated transfer-plates solution enables the precise capture of the bite and the model’s position in the articulator to save a step in the workflow. Multi-line scanning in the D2000 improves coverage and performance for accurate scanning of impressions to enable restorative design without the need to pour gypsum models. All-in-One scanning of triple-tray impressions enables triple-tray scanning capture of upper, lower and bite in just one scan.

Advantages

  • Impression scanning enables prosthetic design to start immediately
  • Color texture scanning enhances details
  • Extended interior and multi-die scanning
  • No need for separate die scan*
  • All-in-one scanning: room for 2 models
  • The scanner comes with an open interface, scans (stl-files) can also be downloaded onto other CAD software

*An additional die scan may be required for cases with limited interproximal space between dies and neighboring teeth. All dies must be trimmed and sectioned.

Technical Info

  • Accuracy: 5 µm (ISO) / 8 µm (Implant bar)
  • Die scan time: 15 sec
  • Full arch scan time: 20 sec
  • 4 x 5 MP cameras with Blue LED Multi-line

 

Have CAP contact you today about Novux Scanners

  • Contact Us

    Phone: 877-977-7889

    Support hours are from 8am - 8pm EST

    Email: customercare@cap-us.com

    Stoneham
    85 Maple Street, Stoneham, MA 02180

    Clearwater
    1155 NE Cleveland St. Clearwater, FL 33755