Custom Automated Prosthetics
Home » Product » Novux Milling Machines

Novux Milling Machines

Introduction

NX Mill4

Novux NX Mill4

Extremely robust and compact, 4-axis milling machine for dry milling

NX Mill5

Novux NX Mill5

 Keep the value creation chain in your laboratory, 5-axis wet and dry milling


Have CAP Contact You About the Novux Mills

NX Mill4

Novux NX Mill4

 

The NX Mill4 is an extremely robust and compact 4-axis dry milling unit for in-house manufacturing of 98.5 mm discs. The NX Mill4 contains 4-axis technology for the processing of undercut areas while producing highly precise and accurate restorations. This compact mill requires minimal space while maintaining maximum stability throughout the milling process. Can be integrated with the entire Novux® digital workflow or as an open CAM system for total flexibility in the dental laboratory.

Millable Material:

  • Zirlux® and other Zirconia
  • Zirlux® Acetal
  • Wax
  • PMMA
  • PEEK
  • Nano-Ceramics

Advantages:

  • Intelligent 4-axis technology for the processing of undercut areas
  • Highly precise and fast processing of all dry millable materials for a wide range of indications
  • The construction of the machine and components used ensure top precision and reliability
  • Minimal upkeep and servicing
  • Highly precise and durable SycoTec spindle
  • High Definition (HD) milling mode creates finely contoured fissures without reworking
  • Can be used with open CAD/CAM systems

Technical Info

  • Dimensions D/W/H: 588 x 516 x 755 mm
  • Weight: 75 kg
  • Electrical connected value: 100-230V, 50/60 Hz
  • Electrical fuse: T3,15A / T6,3A
  • Power output: 250 W
  • Motor speed: 60,000 rpm
  • Compressed air: 6 bar / 50 L/min.
  • Suction: prepared
  • Torque: 4 Ncm
  • Chuck diameter: 3 mm
  • Noise level: 60 dbA
  • Accuracy: < 10 µm
  • Number of axes: 4
NX Mill4

 

Have CAP contact you about the Novux NX Mill4 Today

NX Mill5

Novux NX Mill5

 

The Novux® NX Mill5 is a 5-axis wet and dry processing machine in one unit. This full-bodied milling machine is available as a modular and upgradable system which enables dental laboratories to manufacture an array of materials while using a single machine. Contains disc/blank holders (e.g. for processing glass ceramic) and comes equipped with an automatic tool changer. The NX Mill5 can be with the entire Novux® digital workflow or as an open CAM system for total flexibility in the dental laboratory.

Millable Material:

  • Zirlux® and other Zirconia
  • Zirlux® Acetal
  • Wax
  • Lithium Silicate
  • PMMA
  • PEEK
  • Nano-Ceramics
  • Titanium and Non-Precious Metals

Advantages:

  • Compact wet and dry 5-axis milling machine
  • Compact design for minimum space requirements
  • Modular and upgradable with other material blank holders (e.g. for processing glass ceramic)
  • “Speed boost” milling strategies for high productivity
  • Tool holder with automatic tool changer
  • Low maintenance, very precise and extremely robust Jäger spindle
  • Automatic tool length measurement and broken tool detection
  • Can be used with open CAD/CAM systems
  • Future-proof for new indications (e.g. models, full-denture prosthetics, splints)

Technical Info:

  • Dimensions D/W/H: 588 x 516 x 755 mm
  • Weight: 78 kg
  • Power output: 250 W
  • Motor speed: 60,000 rpm
  • Compressed air: 6 bar / 50 L/min.
  • Suction: prepared
  • Wet processing: prepared
  • Torque: 4 Ncm
  • Chuck diameter: 3 mm
  • Noise level: 60 dbA
  • Accuracy:
  • Number of axes: 5
NX Mill5

 

Have CAP contact you about the Novux NX Mill5 Today

  • Contact Us

    Phone: 877-977-7889

    Support hours are from 8am - 8pm EST

    Email: customercare@cap-us.com

    Stoneham
    85 Maple Street, Stoneham, MA 02180

    Clearwater
    1155 NE Cleveland St. Clearwater, FL 33755