Custom Automated Prosthetics
Home » Product » Dekema Furnaces

Dekema Furnaces

Introduction

2-Hour Sintering Zirconia2

Dekema Sintering Furnaces

Austromat 664

Austromat 664

2:45 Hour sintering for up to 20 units

Argus Fire 674- Austromat

Austromat 674

2:45 Hour sintering for up to 40 units


Dekema-warehouse
Austromat 664 Austromat 664- 2:45 Hour Fast Sinter Cycle
Austromat 664
    • Shortest sintering cycles with highest heating and cooling rates
    • Bottom entry
    • 20 sintering units on each sintering level
    • Large 7.5″ touch panel

 

The high temperature furnace AUSTROMAT 664 iSiC is equipped with two silicon carbide heating elements to safely and consistently operate at temperatures up to 1.530 °C. All components of the AUSTROMAT 664 iSiC sintering chamber are made of highest purity, durable materials to ensure very homogeneous heat distribution in a clean atmosphere.

 

A patent pending, DEKEMA specifi c Platin/Platin Rhodium thermocouple monitors the temperature inside the sintering chamber. Approximately 15 copings with a maximum diameter of 65 mm might be simultaneously sintered on top of the patented insulation table, optionally in two levels doubling capacity. Our time tested AUTODRY system has been further improved, providing both, precise drying steps, as well as quick and direct heating and cooling steps, for extremely short sintering cycles.

Austromat 674 Austromat 674 – 2:45 Hour Fast Sinter Cycle

Argus Fire 674- Austromat
  • Shortest sintering cycles with highest heating and cooling rates
  • Bottom entry
  • 40 sintering units on each sintering level
  • Large 7.5″ touch panel

 

The AUSTROMAT 674 is equipped with three silicon carbide heating elements, perfectly fitting for sintering at temperatures up to 1.530 °C. These heating elements feature robustness and durability and won’t discolor copings. The firing chamber is closed through the vibration free lift system. The AUSTROMAT 674 baSiC2 also uses our unique, well-established system, to realize safely shortest sintering durations with highest heating and cooling rates. This so-called AutoDry system controls temperature gradients through lift movement, dependent on chamber temperature. On each sintering level approximately forty sintering units can be placed. Equip the furnace with two levels to reach highest throughput. Diameters of sintering goods may reach up to 100mm. Sintering programs are already factory preset, loaded through a thumb drive or optionally ­downloaded from the huge DEKEMA sintering program internet data base. Optionally these cycles might even be programmed by one click QR scanning. The furnace is operated through its large 7.5″ touch panel. It also shows the state of the furnace and all relevant data.

Compatible Materials

cubeX²

Super high translucent zirconia, white disc, perfect for all highly aesthetic treatments

 

 

 

 

The new DD cubeX² – cubic zirconia system is a material revolution for technicians who love aesthetics and excellence. Zirconia was never like that. A highly biocompatible material with outstanding transparency. The DD cubeX² system combines the known positive properties of zirconia with a significant increase in translucency as it is known only from lithium disilicate. This material is perfect for all highly aesthetic treatments in anterior tooth region. Moreover, it is also perfectly appropriate for use in the posterior tooth region.

  • Contact Us

    Phone: 877-977-7889

    Support hours are from 8am - 8pm EST

    Email: customercare@cap-us.com

    Stoneham
    85 Maple Street, Stoneham, MA 02180

    Clearwater
    1155 NE Cleveland St. Clearwater, FL 33755