Custom Automated Prosthetics
Home » Product » AG Zirconia – 71mm Discs

AG Zirconia – 71mm Discs

Introduction

AG Zolid FX 71-W

Ceramill Zolid FX

Super-high translucent zircon oxide for monolithic and anatomically reduced restorations in the anterior region

Ceramill Zolid

High translucent monolithic zirconia for full anatomic units

Ceramill Zolid Preshades

Pre-coloured zirconium oxide for monolithic and reduced restorations

Ceramill Zi

Classic high-quality zirconia for framework fabrication

Zolid FX Classic

Ceramill Zolid FX

mac-zolid-fx

Ceramill Zolid FX

Super high translucent zirconia for long-term stability and premium aesthetic

  • Excellent material properties guarantee easy, edge-stable processing in the pre-sintered state
  • Ceramill Zolid FX does not undergo ageing and maintains its strength over the long term
  • High translucency with simultaneous strength enables fabrication of three-unit monolithic bridges as far as the molar region
  • Unique colouring system for economic and precise staining according to the VITA classical shade guide
  • Super-high translucent with long-term stability due to material-friendly sintering at 1450° degrees

Buy-It-Now-02

Zolid_fx_ret

Ceramill Zolid FX is a super-high translucent (SHT) zircon oxide, which is suitable for monolithic and anatomically reduced restorations in the anterior region due to its excellent optical characteristics. A coordinated staining concept of colouring liquids and stains was specially developed for Ceramill FX Classic for customisation and completion of the aesthetics. Aesthetic finalisation is carried out using the stain and glaze materials Ceramill Stain & Glaze. Monolithic restorations, in particular, are given brilliance and light dynamics with the Ceramill Stain & Glaze.

Zolid Classic

Ceramill Zolid

Ceramill Zolid

White HT zirconia – highly translucent for premium aesthetics

  • Fully anatomical crowns and bridges
  • Anatomically reduced crown and bridge frameworks in the anterior and posterior region
  • Telescope and conical crowns
  • Multi-unit, screw-retained restorations on titanium bases
  • A maximum anatomical length of 50 mm
  • Available in 71mm or 98mm discs

Buy-It-Now-02

header_zolid-classic

Ceramill Zolid enables highly aesthetic final results with a relatively small degree of customization. The Ceramill Liquid colouring liquids, specially developed for Ceramill Zolid, enable easy, precise staining in the 16 VITA classical tooth shades and provide a perfect basis for subsequent customisation using Ceramill Stain & Glaze materials and/or veneering porcelain. Ceramill Zolid can be used for fully anatomical or anatomically reduced restorations and has impressive light dynamics, depth effect and natural aesthetics.

Due to the high stability of the material Ceramill Zolid is ideal for fully anatomical restorations, which are functionally adapted from a single piece in combination with the Ceramill CAD/CAM system.

Zolid Preshades

Ceramill Zolid Preshades

mac_zolid-preshade

Ceramill Zolid Preshades

Preshaded HT zirconia – economic with process reliability

  • Fully anatomical crowns and bridges
  • Anatomically reduced crown and bridge frameworks in the anterior and posterior region
  • Telescope and conical crowns
  • Multi-unit, screw-retained restorations on titanium bases
  • A maximum anatomical length of 50 mm
  • Available in 71mm discs

Buy-It-Now-02

header_zolid-preshade

Economic, yet aesthetic results can be achieved using Ceramill Zolid Preshades. The factory preshaded blanks are sintered directly without staining and are used as fully anatomical restorations or the framework for restorations with porcelain veneering. Ceramill Zolid Preshades are available in 4 shade levels and cover 80% of the most commonly used tooth shades in the laboratory.

Dentine shades A1 – B3 can be attained in combination with the stains and glaze porcelains of the Ceramill Stain & Glaze kit. It is possible to customise restorations further using the Ceramill Stains to produce an even more aesthetic final result.

Shades

Zi

Ceramill Zi

mac_zi

Ceramill Zi

Maximum naturalness, aesthetics and compatibility

  • Crowns and bridges in the anterior and posterior region
  • Telescope and conical crowns
  • Custom abutments on titanium bases
  • Multi-unit, screw-retained restorations on titanium bases
  • A maximum anatomical length of 50 mm
  • Available in 71mm discs

Buy-It-Now-02

header_ceramill_zi

Ceramill ZI features high strength, rigidity and biocompatibility. The presintered zirconia blanks have a particularly high flexural strength of up to 1200 MPa and can be processed without any problem thanks to their optimum edge stability. With an opacity value of approx. 70% Ceramill ZI is ideal for indications in which discoloured tooth preparations or metal frameworks must be masked as well as for the fabrication of support structures for fixed and removable prosthetic restorations such as crowns and bridges in the anterior and posterior regions, telescope and conical crowns, customised abutments on titanium bases and multiple-unit, screw-retained restorations on titanium bases.

Ceramill ZI frameworks can be customised with Ceramill Liquid colouring liquids using the immersion or brush technique.

graphs

  • Contact Us

    Phone: 877-977-7889

    Support hours are from 8am - 8pm EST

    Email: customercare@cap-us.com

    Stoneham
    85 Maple Street, Stoneham, MA 02180

    Clearwater
    1155 NE Cleveland St. Clearwater, FL 33755