Custom Automated Prosthetics
Home » Product » AG Classic Products

AG Classic Products

Introduction

Amann Girrbach Classic Products

giroform_fl Giroform

Pin Drill

header_SmartBoxX2 Smartbox X2

Plaster Dispenser

header_SmartMix_X2 Smartmix

Vacuum Mixer

header_NoFlamePlus Noflame Plus

Electric Bunsen Burner

smartwax_duo (1) Smartwax Duo

Wax Modeling Station

header_fraeseinheit_af350AF350

Parallel Milling Device

header_fraestechnik_ap100AP100

Parallelometer (modular)

Giroform

Giroform- Pin Drill

Perfect operation, highly precise and economical

The pin drill allows precise, fast and safe determination of the desired drill position. Drilling starts at the press of a button. The plate holder is fastened magnetically, securing the drill position.

In order to guarantee pin friction, identical, smoothfaced and regular holes are drilled into the giroform base plate. The precise drill guide also enables uniform drilling depth. These specific characteristics of the Giroform® pin drill guarantee precise, fast and cost-effective model manufacture.

 

Features:

  • Fast and easy to use
  • Laser beam for easy drill positioning
  • Plate holder smoothly adjustable thus ensuring safe and fast operation
  • Plate holder is secured magnetically and automatically when drilling starts
  • Semi-automatic drilling at the press of a button (0.5 seconds per hole)
  • Automatic drill advance guarantees identical boreholes in the plates
  • Ergonomically positioned tip-on buttons for a high degree of operating convenience and easy activation of drilling
  • Guide grooves ensure easy drill change
  • Robust device providing many years of reliability

 

Buy-It-Now-02

giroform_fl

 

Technical Specifications:

  • Dimensions D/W/H: 250 x 183 x 370 mm
  • Weight: 9,6 kg
  • Mains supply: 230 (100/115) V/0,32 W
  • Motor speed: 2.800 min-1
  • Laser class: 3A < 5mW

Smartbox X2

Smartbox X2- Plaster Dispenser

The most homogenous plaster dispensing method yet

Weighing and mixing plaster and water by hand is too imprecise and time-consuming by the high standards of the dental laboratory. Aside from ensuring a consistent high degree of dosage precision, the Smartbox is easy to operate and pays for itself within a few months.

Using the new dosage technology, the plaster is sprinkled very finely into the mixing beaker, which noticeably increases the homogeneity of the mixture.

 

Features:

  • Time, material and plaster savings of 20 to 25%
  • Finely sprinkled plaster using the new patented plaster dosage technology
  • Multifunctional turn/ push button for simple and quick programming and program selection
  • Easy operation – error-free working for everyone
  • Reproducible mixing ratio at the push of a button, accurate to within a gram
  • Integrated scales automatically measure the dosage or for manual weighing
  • Enables clean and dust free operation

 

Buy-It-Now-02

header_SmartBoxX2

 

Technical Specifications:

  • Dimensions D/W/H: 335 x 240 x 590 mm
  • Weight: 16,5 kg
  • Mains supply: 100/115/230 V, 50/60 Hz
  • Output: 95 W
  • Capacity Powder: appr. 8 kg
  • Time to alot 20ml: 100g appr. 30s

Smartmix X2

Smartmix X2- Vacuum Mixer

Perfect mixture results thanks to patented mixing blade geometry and amazingly simple operating concept

The universal and futureproof vacuum-mixing machine with the amazingly simple operating concept.

When processing homogenous plaster, investment material or paste silicon and impression material, the Smartmix vacuum-mixing machine is an indispensable and productive piece of equipment.

 

Features:

  • Multi-functional dial / button for quick and easy program selection and programming
  • Homogeneous, consistent mixing quality
  • Consistent, reproducible mixtures with optimal parameter
  • Quick access to all mixing parameter: mixing duration, speed, direction of rotation, interval times, pre-mixing, pre-vacuum, post-vacuum and program name
  • Space-saving design
  • Meets the requirements of modern high-performance plasters and embedding masses
  • Less re-work required due to consistent mixing results
  • The universal and future-proof, vacuum mixing machine
  • Beaker with mixing blade 500 ml included

 

Buy-It-Now-02

header_SmartMix_X2

 

Technical Specifications:

  • Dimensions D/W/H: 250 x 160 x 350 mm (without stand)
  • Weight: 8,5 kg
  • Mains supply: 100/115/230V, 50/60 Hz
  • Output: 210W
  • Delivery rate: 15,8l/min
  • Vaccum power: -800 mbar

Noflame Plus

Noflame Plus- Electric Bunsen Burner

The “electric Bunsen burner” in the form of compact induction heating replaces the open flame

Within seconds, the modelling instrument is heated up in the coil opening at very low power consumption. To be used at any place where an electric socket is available.

 

Features:

  • Mobile and immediately operational, no gas required
  • Handling as usual, no adjustment required
  • Eliminates the risks of getting burned or causing fire
  • No heat emission into the environment; does not consume oxygen
  • Clean, i.e. no soot particles on instrument and/or material
  • Saves 75% of energy expenses; saves the environment
  • Ideal conditions, to be used even at the dental office

 

Buy-It-Now-02

header_NoFlamePlus

 

Technical Specifications:

  • Dimension D/W/H: 195 x 85 x 83 mm
  • Weight: 600 g
  • Mains supply: 230 V/50 Hz/130 W


Smartwax Duo

Smartwax Duo- Wax Modeling Station

Efficient modeling station for working with to handpieces

This unit is suitable for all kinds of modeling and wax-up work and is unbeatable in combination with the Waxjet when making full dentures. For each handpiece, 3 different temperatures within the range of 50-220°/122-428 F can be programmed and simply switched over. This improves the soft and above all stress-free treatment of the various types of waxes.

In doing so, the excellent thermal conductivity of the instrument alloy used for the probes (more than 20 times the thermal conductivity of stainless steel) plays an important role as well.

 

Features:

  • Duo-option, i.e. two different handpieces are ready for use at the same time
  • 3 individually programmable temperatures for each handpiece
  • Simple and safe exchange mechanism of the modeling tips
  • Fast operational and heated instruments
  • Anti-twist cables that are insensitive to heat
  • Gold plated copper tips for better heat conductivity
smartwax_duo (1)

 

Technical Specifications:

  • Dimensions D/W/H: 130 x 150 x 50 mm
  • Length of the handpiece cord: 1.8 m
  • Mains adaptor: 110-230V 50/60 Hz
  • Output voltage: 6V
  • Electrical power: 12W
  • Temp.-range: 50-220°C/122-428°F-switchable

AF350

AF350- Parallel Milling Device

Universal use thanks to modular components for surveying, blockout, milling

Stable precision milling device on solid vertical column with ball thread and playless, smooth, double-jointed arm. Milling head with micrometer screw for accurate adjustment of vertical drillings. Integrated control for micromotor, magnetic table with modular design and light connections. Micromotor can be replaced by optional analyzing rod for surveying or block out set for blocking out.

 

Features:

  • Upgradable to an undercut and surveying machine (optional)
  • Quick and easy fixing of the double-joint arm with one hand
  • Automatic retraction of the articulated arm via memory function
  • Model table can be magnetically fixed in its position automatically by pressing one button
  • It is possible to fix the model table MT3 at the push of a button in any angle with the patented fixing mechanism
  • Spring pressure arm resistance for vertical manoeuvrability
  • Shadow-free illumination with the LED double light fixture
header_fraeseinheit_af350

 

Technical Specifications:

  • Dimensions D/W/H: 340 x 250 x 450 mm
  • Weight: 15 kg
  • Mains supply: 100/115/230 V, 50/60 Hz
  • Motor speed: 1.000 – 40.000 min-1
  • Torque: max. 7,5 N/cm

AP100

AP100- Parallelometer (modular)

General-purpose parallelometer

Due to its modular construction it can be upgraded to a full milling machine and blockout device. It has an electromagnetic base plate for fixing the model table, an articulated arm and an analyzing rod. The electricity for the device and the light as well as the continuously variable control for the electrically heated block out set are placed in the base.

 

Features:

  • Upgradable to a blockout device and milling machine.
  • Quick and easy fixing of the double-joint arm with one hand
  • No-play and smooth three-dimensional guidance
  • Automatic retraction of the articulated arm via memory function
  • Temperature control for blocking out with the blockout-set
  • Model table can be magnetically fixed in its position automatically by pressing one button
header_fraestechnik_ap100

 

Technical Specifications:

  • Dimension D/W/H: 210 x 180 x 400 mm
  • Weight: 6,2 kg
  • Range of collet: 1 – 3 mm
  • Mains supply: 115 v/230 v – 50 Hz
  • Power: 22 w
  • Contact Us

    Phone: 877-977-7889

    Support hours are from 8am - 8pm EST

    Email: customercare@cap-us.com

    Stoneham
    85 Maple Street, Stoneham, MA 02180

    Clearwater
    1155 NE Cleveland St. Clearwater, FL 33755