Custom Automated Prosthetics
Home » Articles posted by Bob Cohen

Author Archives: Bob Cohen

Coloring Green State Zirconia- Be it Simple or Complex

Coloring Green State Zirconia- Be it Simple or Complex
Zirconia, for dental crowns and bridges was first introduced by 3M as Lava. With the Lava system the white zirconia was milled and copings were dipped into one of eight … Continued

Selecting the Right Zirconia for Each Indication

Selecting the Right Zirconia for Each Indication
  To begin, let’s look at the comparative analysis of the three major categories of zirconia: High Strength (HS) flexural strength of 1200 MPa or more High Translucent (HT) 1100 … Continued

Zirconia: We’ve Come a Long Way!

Zirconia: We've Come a Long Way!
Going back just a few years, BruxZir zirconia was introduced as the first monolithic zirconia material. Marketed by Glidewell Laboratories as “More Brawn than Beauty,” Bruxzir was an instant success … Continued

Top 5 Things to Know About Sintering Zirconia

Top 5 Things to Know About Sintering Zirconia
It seems as though we at CAP take a fair number of support calls for bad-looking zirconia. Most often, this is related to sintering cycles and/or sintering complexities. Here are … Continued
  • Contact Us

    Phone: 877-977-7889

    Support hours are from 8am - 8pm EST

    Email: customercare@cap-us.com

    Stoneham
    85 Maple Street, Stoneham, MA 02180

    Clearwater
    1155 NE Cleveland St. Clearwater, FL 33755